Home > Clean Water Filters >

RapidPure Water Filter DIY Gravity Drip Filter Kit (Kit only No buckets)



 
Alternative Views:


Group Buy Price: $39.00


Availability: Usually Ships in 24 to 72 Hours


Add Additional Large Pre-filter Bag [Add $7.50]

Qty:  
Description FAQ
 
RapidPure Water Purifier Do It Yourself Gravity Drip Water Filtering Kit

Buckets pictured are not included but show how the kit works when installed!

This is the gravity drip type DIY RapidPure Water Filter Purifier Kit with includes; The RapidPure Trail Blazer Ultra Light 1.4L 2.5" Purifier Element, a spigot, and a large industrial 1-micron pre-filter bag (length varies from those pictured). You will need to provide 2 of your own plastic buckets (any 2 of the same size will do) and 2 lids, which you will need to get yourself .

Instructions for assembly can be found at this link: http://www.getpreparedstuff.com/FilterInstructions

For an inexpensive water filter and purifying solution this RapidPure kit is wonderful, amazing, and so incredibly reasonably priced that everyone can (and I believe should) get one. This is a key thing for your family to be able to have plenty of clean water after your own water storage runs out.

The RapidPure Trail Blazer is fast and will filter ~1.4L per minute (1 gallon every 3-4 minutes) and will provide you with about 1,000 gallons (6-8 months of use at 1 gal/day per person for a family of 4). The RapidPure filter not only removes bio-hazards from you water but can also hold on to chemicals like heavy metals, chlorine, pesticides, herbicides, etc. Of course how long the element will works depends on how dirty the water is. The RapidPure filter's life can be extended by pre-filtering using the larger, 1 micron PRE-FILTER BAG that is included with this kit. The RapidPure filter however is the one that does the needed job of removing viruses, protozoa, bacteria, and other "wigglies" and pathogens from the water. The larger, 1-micron, pre-filter bag that comes with the kit can extend the life of your filter by removing larger sized sediment and particles before they would clog the RapidPure filter. (note the bag filter performs at 1-micron about 80% of the time)

This product is silver impregnated and will not permit bacteria growth-through (mitosis). It provides a hostile environment for all microbiological organisms and will not support their growth.

What's included:
1 x RapidPure Trail Blazer Ultra Light 1.4L DIY Water Filter 2.5" Element
1 x Spigot
1 x 1 micron industrial filter bag with 7" opening (length varies from those pictured and are typically shorter at about 16" inches long which makes them easier to use)
1 x instruction sheet (same as is linked above) which explains how to drill holes into your buckets and lid.

Note: You must furnish your own buckets of any size (5-6 gallon pails w/lids work great) for this project

Accessories
Water Pre Filter Sock Micron Filter Bag Ceramic Water Filter Black Berkey Purification Elements (set of 2) PF-4 Arsenic & Fluoride Reduction Elements (set of 4)
Our Price: $7.25
Our Price: $29.00
Our Price: $107.00

Share your knowledge of this product. Be the first to write a review »
Note: Coupon codes or other special offers cannot be used in conjunction with the special prices shown on this page or any discounted Christmas priced item.